Restore your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may require to restore your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the configurations or are experiencing unexpected behavior. Fortunately, resetting your Holosun is a simple process that can be completed in just a few actions.

• Begin by ensuring your red dot sight is turned on.
• Find the small reinitialize button on the side of the device.
• Utilize a paperclip to press and hold the reset button for approximately 5 moments.
• Disengage the reset button and your Holosun EPS Carry Red Dot sight will reboot.
• The red dot sight should now be returned to its factory settings.

Reset Your Holosun EPS Carry Red Dot back to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to start fresh, resetting it to its factory configuration is a breeze. First, find the tiny button on the bottom of your optic. Then, sustain it for around five seconds until you see the indicator light change. Your Holosun EPS Carry is now returned to its factory settings, ready for accurate shooting.

Bring Your Holosun EPS Carry Back to Life

Is your beloved Holosun EPS Carry experiencing some glitches? Don't despair! A simple factory reset can often solve the problem and get your red dot sight back to its former glory. Before you begin, remember to disconnect the battery from your Holosun EPS Carry to prevent unexpected activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these simple steps:

• Press and hold the power button for approximately 7 seconds.
• An indicator will flash, indicating that the reset is successfuly initiated.
• Release the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can connect the battery and test get more info your sight's functionality. If you encounter any further difficulties, don't hesitate to seek help from Holosun's support.

Return Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Adhere to these steps carefully to ensure a successful factory reset.

• Beginning with, Activate your Holosun EPS Carry by pressing the power button.
• After that, press and hold both the mode button and the up/down adjustment button simultaneously.
• During continue holding these buttons, activate the power button once.
• You will show a confirmation prompt indicating that the reset process is initiated.
• Allow the process to finish. This may take a few moments. Once done, your Holosun EPS Carry will automatically shutdown.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Erase All Settings on Your Holosun EPS Carry

To Default reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Pressing a specific button combination. Consult your Guidebook for the exact button sequence for your model. Once in the settings menu, look for an option that says "Clear Settings". Select this option and confirm the reset. Your sight will then power off and restart with all settings Restored to their default values.

Restore your Holosun EPS Carry with a Factory Standard Settings

If your Holosun EPS Carry is acting funny, a factory reset might be the fix. This will return your sight to its original settings, clearing any personalized configurations you've made. To perform this reset, adhere to these straightforward steps:

• To begin, locate the reset lever on your EPS Carry.
• Secondly, press a small object, like a toothpick, to push the reset lever.
• As you keep the reset switch pressed, activate your EPS Carry.
• It will display a message showing that the reset is finished.

Once the reset is finished, your EPS Carry will be back to its factory settings.

Report this wiki page